









2007-2011 Ford Ranger Transfer Case Control Module TCCM 7L54-7H473-AB OEM
7L54-7H473-AB
VIN programming required after install
This module needs VIN programming after install. A dealer or locksmith with the right scan tool can do it. Not sure your installer can program? Message us first — we'll help you confirm.
Tested functional. Cleaned.
This OEM Transfer Case Control Module fits 2007–2011 Ford Ranger — part number 7L54-7H473-AB, interchanging with 7L54-7H417-AB and 591-01183. Also fits 2007–2009 Mazda B4000. The module has been tested functional and cleaned, and will require VIN programming before installation.
From the shop
This module reads what you pick on the 4WD selector and commands the encoder motor to shift the transfer case in or out of four-wheel drive, then checks the motor's position sensor to confirm the shift actually completed. If yours is acting up, you'll usually see a 4WD service message, mode lights that won't settle down, or a shift that just never finishes. Tested functional. Cleaned. Mounts front, center, upper. Fits 2007–2011 Ford Ranger; 2007–2009 Mazda B4000. Part numbers: 7l54-7H473-AB, interchange 7L54-7H417-AB, 24006-05787277, 591-01183, 7L54-7H417. This unit requires programming to your vehicle after installation. Check your old unit's tag against these numbers before ordering. Ships Mon–Fri same day before 3pm EST. — Hubes
— Hubes
Vehicle fitment
Fits 2007–2011 Ford Ranger; 2007–2009 Mazda B4000. Replaces OEM # 7L54-7H473-AB.
| Years | Makes | Models |
|---|---|---|
| 2007–2011 | Ford | Ranger |
| 2007–2009 | Mazda | B4000 |
Please note: Will require programming to your VIN.
Is this your problem?
A quick diagnostic from the shop — see the symptoms before you buy, so you order the right part once.
Read the full transcript
Specifications
Part Identification
- OEM Part Number
7L54-7H473-AB- Brand
- Ford
- Also Replaces
7L54-7H417-AB,24006-05787277,591-01183,7L54-7H417- Also searched as
7L547H473AB- Also Known As
- Transfer Case Control Module, Transfer Case Module, Shift Controller, TCC Module, 4WD Control Module, 4x4 Module, 4x4 / 4WD Shift Control Module, 4WD Engagement Computer, Transfer Case Control Relay Module
Condition & Testing
- Condition
- Used
Specifications
- Material
- Plastic
- Connector Type
- Dual-plug receptacle layout
- Terminal Type
- Pin
- Terminal Count
- 26
- Placement
- Front
- Center
- Upper
- What's Included
- Pigtails
- Dimensions
- 6.0" H × 10.0" L × 8.0" W · 16.0 oz
Compliance
- Country of Origin
- United States





