









2011-2013 Hyundai Sonata ABS Module 589203S400 OEM
589203S400-GDI
VIN programming required after install
This module needs VIN programming after install. A dealer or locksmith with the right scan tool can do it. Not sure your installer can program? Message us first — we'll help you confirm.
Tested and functional. Connector pins intact. Cleaned exterior.
This OEM ABS Module (part number 589203S400-GDI, interchange 58920-30500) fits the 2011–2013 Hyundai Sonata and mounts at the front, lower position. It has been tested and confirmed functional, with connector pins intact and the exterior cleaned.
From the shop
Anti-lock braking depends on this module doing the math between wheel-speed sensors and the hydraulic unit, holding back pressure at each corner so a wheel doesn't lock under hard braking. Fits 2011–2013 Hyundai Sonata. Part numbers: 589203S400-GDI, interchange 58920-30500. When it fails, the ABS light usually comes on and that per-wheel control disappears, though the brakes themselves keep stopping the car. Tested and functional. Connector pins intact. Cleaned exterior. Mounts front, lower. This unit requires programming to your vehicle after installation. Ships Mon–Fri same day before 3pm EST. Check your old module's tag against the numbers above before ordering. — Hubes
— Hubes
Vehicle fitment
Fits 2011–2013 Hyundai Sonata. Replaces OEM # 589203S400-GDI.
| Years | Makes | Models |
|---|---|---|
| 2011–2013 | Hyundai | Sonata |
Please note: YF Sonata ESC unit (2.4L non-hybrid). Hollander splits this family four ways: hybrid (separate 58920-4R650 assembly), 2.0L turbo, and 2.4L with vs without sport suspension — match the part number and software marking on your unit label.
Is this your problem?
A quick diagnostic from the shop — see the symptoms before you buy, so you order the right part once.
Read the full transcript
Specifications
Part Identification
- OEM Part Number
589203S400-GDI- Brand
- Hyundai
- Also Replaces
58920-30500- Also searched as
589203S400GDI- Also Known As
- Anti-Lock Brake Module, ABS Pump, ABS Control Module, EBCM, HCU, Hydraulic Control Unit, ABS Hydraulic Unit
Condition & Testing
- Condition
- OEM Tested
Specifications
- Material
- Steel
- Finish
- Uncoated
- Connector Type
- Female
- Terminal Type
- Pin Plug
- Placement
- Front
- Lower
Compliance
- Country of Origin
- South Korea





