










2010-2014 Ford Mustang ABS Anti Lock Brake Pump Module AR33-2C405-BC OEM
AR33-2C405-BC
VIN programming required after install
This module needs VIN programming after install. A dealer or locksmith with the right scan tool can do it. Not sure your installer can program? Message us first — we'll help you confirm.
Tested and functional. Connector pins intact. Cleaned exterior.
This OEM ABS Anti-Lock Brake Pump Module fits 2010–2014 Ford Mustang (OEM AR33-2C405-BC / interchange AR332C405). It has been tested and confirmed functional, with connector pins intact and the exterior cleaned — a ready-to-install replacement for the front ABS hydraulic control assembly on these Mustangs. Important: on vehicles where this module requires programming, the dealer scan-tool procedure normally reads the existing configuration from your original module — so leave the original fitted until the replacement has been programmed if you can. If it has already been removed, the procedure can still be completed by entering the As-Built data.
From the shop
Brake pressure gets balanced at each wheel by this module, using the wheel-speed sensors to keep any one corner from locking up under hard braking. Fits 2010–2014 Ford Mustang. Part numbers: AR33-2C405-BC, interchange AR332C405. When it fails, the ABS light usually comes on and you lose that wheel-by-wheel control, though normal braking still stops the car. Tested and functional. Connector pins intact. Cleaned exterior. Mounts front. This unit requires programming to your vehicle after installation. Check your old module's tag against the numbers above before ordering, and message me if anything doesn't match. Ships same day Mon–Fri if you order before 3pm EST. — Hubes
— Hubes
Vehicle fitment
Fits 2010–2014 Ford Mustang. Replaces OEM # AR33-2C405-BC.
| Years | Makes | Models |
|---|---|---|
| 2010–2014 | Ford | Mustang |
Is this your problem?
A quick diagnostic from the shop — see the symptoms before you buy, so you order the right part once.
Read the full transcript
Specifications
Part Identification
- OEM Part Number
AR33-2C405-BC- Brand
- Ford
- Also Replaces
AR332C405- Also searched as
AR332C405BC- Also Known As
- Anti-Lock Brake Module, ABS Pump, ABS Control Module, EBCM, HCU, Hydraulic Control Unit, ABS Hydraulic Unit
Condition & Testing
- Condition
- OEM Tested
Specifications
- Material
- Plastic
- Connector Type
- Female
- Terminal Type
- Pin Plug
- Placement
- Front
Compliance
- Country of Origin
- United States





