ABS Module

2013-2014 Ford F-150 Anti-Lock Brake Pump Module Assembly DL34-2C405-A OEM

OEM Part Number
DL34-2C405-A
by Ford·MPN DL342C405A
$143.99
Sold out — sourcing in progress
Will this fit your vehicle? See the fitment table below to check.
BEFORE YOU BUY

VIN programming required after install

This module needs VIN programming after install. A dealer or locksmith with the right scan tool can do it. Not sure your installer can program? Message us first — we'll help you confirm.

PART CONDITION

Tested and functional. Connector pins intact. Cleaned exterior.

Other ABS Modules in stock now

Can’t wait? Ask us to source this exact part →
5.0 (25)
Free Shipping — US and US territories

This is the OEM Anti-Lock Brake Pump Module Assembly (DL34-2C405-A) for 2013–2014 Ford F-150 trucks, non-hybrid only, mounted front driver side lower. The ABS module regulates brake pressure to individual wheels during hard stops; when this unit fails, drivers typically see an ABS warning light and loss of anti-lock braking function. Programming required.

From the shop

Wheel-speed data comes into this module, and it decides how much brake pressure each corner gets so the wheels keep rolling instead of locking up under hard braking. When it's on its way out, the ABS lamp stays lit and the anti-lock function stops doing its job — normal braking still stops the vehicle, just without that per-wheel control. Tested and functional. Connector pins intact. Cleaned exterior. Mounts front, driver side, lower. Fits 2013–2014 Ford F-150. Part numbers: DL34-2C405-A, interchange DL3Z-2C219-A, 0265952213, 0265252253AB. This unit requires programming to your vehicle after installation. Ships same day Mon–Fri if you order before 3pm EST. — Hubes

— Hubes

Vehicle fitment

Fits 2013–2014 Ford F-150. Replaces OEM # DL34-2C405-A.

Years Makes Models
2013–2014 Ford F-150

Does not fit: Hybrid models.
Please note: Drivetrain: Rear-Wheel Drive (4x2 / 2WD) Only, with Roll Stability Control (RSC). Fits 3.5L EcoBoost, 3.7L V6, 5.0L V8, and 6.2L V8. NOT for 4x4 trucks — the 4x4 unit is DL34-2C405-B (different unit). NOT the Raptor/SVT unit (DL3V-2C405-A). Bosch hydraulic control unit; coding required when installing a different unit. Match the part number on your unit label.

Is this your problem?

A quick diagnostic from the shop — see the symptoms before you buy, so you order the right part once.

Read the full transcript
Symptoms of a bad ABS module and how to tell if your brake computer is going bad. After 30 years in OEM auto parts, I see people misdiagnose this all the time. If your ABS light just popped on, the first thing to know is your car will stop, but you've lost your anti-like brake function, stability control, and traction control. So how do you know it's your module? You'll get the trifecta warning lights many times, which is stability, traction, ABS, all hitting at the same time. Your brake pedal might feel unusually firm under hard braking, and the speedometer could be a static or drop out due to wheel speed data loss. Module versus sensor. To know for sure, plug in a scan tool. If you pull a single wheel speed sensor code, it's just a cheap sensor. But if you pull internal chassis C codes like pump motor circuit or valve relay, that means the electronic brain inside your modules essentially cook. Do not buy a cheap aftermarket gamble. Hit the link in my bio, shoot me your make model in year or your VIN number and your trouble codes and we'll diagnose your problem right here. from cubes of HQ.

Specifications

Part Identification

OEM Part Number
DL34-2C405-A
Brand
Ford
Also Replaces
DL3Z-2C219-A, 0265952213, 0265252253AB
Also searched as
DL342C405A
Also Known As
Anti-Lock Brake Module, ABS Pump, ABS Control Module, EBCM, HCU, Hydraulic Control Unit, ABS Hydraulic Unit

Condition & Testing

Condition
Used

Specifications

Material
Plastic, Aluminum
Connector Type
Heavy-duty weather-sealed female receptacle
Terminal Type
Pin
Terminal Count
46
Placement
  • Front
  • Driver Side
  • Lower
What's Included
  • Pigtail
Dimensions
8.0" H × 10.0" L × 8.0" W · 112.0 oz

Compliance

Country of Origin
United States

Frequently asked questions

Will this Anti-Lock Brake Pump Module fit my 2013-2014 Ford F-150?
Yes — this is a direct-fit OEM replacement for the 2013-2014 Ford F-150. Message us your VIN if you want us to double-check compatibility before you buy.
Is this part tested?
Yes. Every part is inspected and tested before listing. Used condition with a 30-day money-back guarantee.
Is this OEM or aftermarket?
100% OEM. Never aftermarket. We only sell genuine factory parts.
What is the OEM part number?
The OEM part number is DL34-2C405-A. Interchange/alternate numbers: DL3Z-2C219-A, 0265952213, 0265252253AB, DL342C405A.
Can you verify fitment before I buy?
Absolutely — message us your VIN and we'll confirm this part fits your vehicle before you purchase.
What is your return policy?
30-day money-back guarantee on every order. Free return shipping if the part doesn't fit or match the description.
What is this Anti-Lock Brake Pump Module also called?
This Anti-Lock Brake Pump Module is also known as: Anti-Lock Brake Module, ABS Pump, ABS Control Module, EBCM, HCU, Hydraulic Control Unit, ABS Hydraulic Unit. These are different names for the same part.
What other part numbers does this Anti-Lock Brake Pump Module fit?
This Anti-Lock Brake Pump Module is interchangeable with the following OEM part numbers: DL3Z-2C219-A, 0265952213, 0265252253AB, DL342C405A. The primary OEM part number is DL34-2C405-A.