








2011-2013 Ford Edge Lincoln MKX ABS Brake Pump Module CT43-2C405-BA OEM
CT432C405BA
VIN programming required after install
This module needs VIN programming after install. A dealer or locksmith with the right scan tool can do it. Not sure your installer can program? Message us first — we'll help you confirm.
Tested and functional. Connector pins intact. Cleaned exterior.
This is the front ABS Brake Pump Module — OEM part CT432C405BA — fitting 2011–2013 Ford Edge and 2011–2013 Lincoln MKX. It has been tested and confirmed functional, with intact connector pins and a cleaned exterior.
From the shop
If the ABS light stays on and the anti-lock function stops doing its job, the brakes still work but wheel lock-up control is gone — that's the signal this module's given out. Tested and functional. Connector pins intact. Cleaned exterior. Mounts front. Part numbers: CT432C405BA, interchange CT432C405. Fits 2011–2013 Ford Edge, Lincoln MKX. This unit requires programming to your vehicle after installation. Have your VIN handy if you want to double check the fit before ordering. Ships same day Mon–Fri before 3pm EST. — Hubes
— Hubes
Vehicle fitment
Fits 2011–2013 Ford Edge; 2011–2013 Lincoln MKX. Replaces OEM # CT432C405BA.
| Years | Makes | Models |
|---|---|---|
| 2011–2013 | Ford | Edge |
| 2011–2013 | Lincoln | MKX |
Please note: Edge/MKX 2011-2013 with ADAPTIVE CRUISE CONTROL. Per the Ford Workshop Manual, the 2C405 assembly is the HCU for ACC-equipped vehicles and INCLUDES the ABS module; vehicles without ACC use the 2C215 HCU (module serviced separately). Roll Stability Control is standard on all units. The -AB vs -BA suffixes are revision/configuration levels within the ACC assembly — match the part number on your unit label. Module configuration download (scan tool) required when installing a new module.
Is this your problem?
A quick diagnostic from the shop — see the symptoms before you buy, so you order the right part once.
Read the full transcript
Specifications
Part Identification
- OEM Part Number
CT432C405BA- Brand
- Ford
- Also Replaces
CT432C405- Also Known As
- Anti-Lock Brake Module, ABS Pump, ABS Control Module, EBCM, HCU, Hydraulic Control Unit, ABS Hydraulic Unit
Condition & Testing
- Condition
- OEM Tested
Specifications
- Material
- Steel
- Finish
- Chrome
- Connector Type
- Female
- Terminal Type
- Pin Plug
- Placement
- Front
- Length
- 4.0
Compliance
- Country of Origin
- Mexico





