














2011-2014 Dodge Avenger ABS Brake Pump ABS Module P68165999AC OEM
P68165999AC
VIN programming required after install
This module needs VIN programming after install. A dealer or locksmith with the right scan tool can do it. Not sure your installer can program? Message us first — we'll help you confirm.
Tested and functional. Connector pins intact. Cleaned exterior.
Programming required — this module must be programmed to the receiving vehicle before use. This OEM ABS Brake Pump and ABS Module assembly fits 2011–2014 Dodge Avenger and Chrysler 200. Interchanging with multiple OEM suffixes (P68165999AB through AE, P68067419AA), it is tested and functional with intact connector pins — note that programming to the receiving vehicle is required prior to use.
From the shop
Brake pressure at each wheel only gets adjusted properly when this module is doing its job — that's the whole function, reading wheel speed and telling the hydraulic unit how much to give or hold back. When it quits, you'll notice the ABS light stays lit and the anti-lock function goes quiet, though your brakes themselves still stop the car, just without that wheel-by-wheel control. Tested and functional. Connector pins intact. Cleaned exterior. Mounts front. Fits 2011–2014 Dodge Avenger, Chrysler 200. Part numbers: P68165999AC, interchange P68165999AB, P68165999AD, P68165999AE, 68165999, P68067419AA. This unit requires programming to your vehicle after installation. Ships same day Mon–Fri before 3pm EST. — Hubes
— Hubes
Vehicle fitment
Fits 2011–2014 Dodge Avenger; 2011–2014 Chrysler 200. Replaces OEM # P68165999AC.
| Years | Makes | Models |
|---|---|---|
| 2011–2014 | Dodge | Avenger |
| 2011–2014 | Chrysler | 200 |
Is this your problem?
A quick diagnostic from the shop — see the symptoms before you buy, so you order the right part once.
Read the full transcript
Specifications
Part Identification
- OEM Part Number
P68165999AC- Brand
- Mopar
- Also Replaces
P68165999AB,P68165999AD,P68165999AE,68165999,P68067419AA- Also searched as
68165999AC- Also Known As
- Anti-Lock Brake Module, ABS Pump, ABS Control Module, EBCM, HCU, Hydraulic Control Unit, ABS Hydraulic Unit
Condition & Testing
- Condition
- Used
Specifications
- Material
- Plastic
- Connector Type
- 1x Integrated rectangular Female Cavity Receiver.
- Terminal Type
- Pin
- Terminal Count
- 26
- Placement
- Front
- What's Included
- Pigtail
- Dimensions
- 8.0" H × 10.0" L × 8.0" W · 112.0 oz
Compliance
- Country of Origin
- Mexico





