









2010 Ford F-150 Transfer Case Control Module TCCM 2WD AL3A-7H417-CB OEM
OEM Part NumberAL3A-7H417-CB
VIN programming required after install
This module needs VIN programming after install. A dealer or locksmith with the right scan tool can do it. Not sure your installer can program? Message us first — we'll help you confirm.
Tested functional. Cleaned. Will require programming to your VIN.
- Free Shipping — US and US territories
This OEM transfer case control module (TCCM), MPN AL3A-7H417-CB, fits the 2010 Ford F-150 and manages engagement and disengagement of four-wheel drive by commanding the transfer-case encoder motor. Failures on this part type commonly appear as a 4WD service message, mode indicator lights that cycle or flash, or a transfer case that will not complete a shift. Tested functional and cleaned; programming to your VIN is required.
From the shop
The transfer case control module (TCCM) manages 2WD/4WD engagement and shift logic on your 2010 Ford F-150. When it fails, you'll often see stuck transfer case modes, no response to shift commands, or warning lights on the dash. This unit is used, tested functional, and cleaned. It will require programming to your VIN before installation. OEM and interchange part numbers on file.
— Hubes
Vehicle fitment
Fits 2010 Ford F-150. OEM part number AL3A-7H417-CB.
| Years | Makes | Models |
|---|---|---|
| 2010 | Ford | F-150 |
Please note: For Trucks with Electronic Locking Rear Differential (E-Locker) option—such as FX2 or 2WD Off-Road / Max Tow packages that have the pull-out rear differential lock switch on the dash without a 4WD transfer case.
Is this your problem?
A quick diagnostic from the shop — see the symptoms before you buy, so you order the right part once.
Read the full transcript
Specifications
Part Identification
- OEM Part Number
-
AL3A-7H417-CB - Brand
- Ford
- Also Replaces
AL3A-7H417-CA,AL3Z-7E453-CB,AL3Z-7E453-CA- Also searched as
AL3A7H417CB- Also Known As
- Transfer Case Control Module, Transfer Case Module, Shift Controller, TCC Module
Condition & Testing
- Condition
- Used
Specifications
- Material
- Plastic
- Placement
- Front
- Passenger Side
- What's Included
- Pigtail
- Dimensions
- 6.0" H × 10.0" L × 8.0" W · 24.0 oz





