








2010-2011 Ford Escape ABS Anti Lock Brake Module Only -MO AL842C405AC OEM
AL84-2C405-AC
VIN programming required after install
This module needs VIN programming after install. A dealer or locksmith with the right scan tool can do it. Not sure your installer can program? Message us first — we'll help you confirm.
Tested and functional. Connector pins intact. Cleaned exterior.
This OEM ABS anti-lock brake module fits 2010–2011 Ford Escape and Mercury Mariner (non-hybrid) and carries OEM part number AL84-2C405-AC with interchange numbers AM6Z-2C219-A and AM6Z-2C219-B. Tested and functional with intact connector pins. Note: programming is required prior to installation. Important: on vehicles where this module requires programming, the dealer scan-tool procedure normally reads the existing configuration from your original module — so leave the original fitted until the replacement has been programmed if you can. If it has already been removed, the procedure can still be completed by entering the As-Built data.
From the shop
On a hard stop or a slick patch, this is what keeps one wheel from grabbing while the others roll — it takes the speed readings off each sensor and tells the hydraulic unit how much pressure each corner gets. If it's giving trouble, expect the ABS light on and no anti-lock function, though the brakes themselves still stop the vehicle. Fits 2010–2011 Ford Escape, Mercury Mariner. Part numbers: AL84-2C405-AC, interchange AL84-2C405-AC, AM6Z-2C219-A, AM6Z-2C219-B. Mounts front, left, lower. Tested and functional. Connector pins intact. Cleaned exterior. This unit requires programming to your vehicle after installation. Ships same day Mon–Fri if you order before 3pm EST. — Hubes
— Hubes
Vehicle fitment
Fits 2010–2011 Ford Escape; 2010–2011 Mercury Mariner. Replaces OEM # AL84-2C405-AC.
| Years | Makes | Models |
|---|---|---|
| 2010–2011 | Ford | Escape |
| 2010–2011 | Mercury | Mariner |
Does not fit: Hybrid models.
Please note: MODULE ONLY: this is the ABS control module that mounts on the AL84-2C405 hydraulic pump assembly. Ford services the control module separately under basic 2C219 (2010 Escape service module AM6Z-2C219). Coding/programming is typically required — match the number on your unit label before ordering.
Is this your problem?
A quick diagnostic from the shop — see the symptoms before you buy, so you order the right part once.
Read the full transcript
Specifications
Part Identification
- OEM Part Number
AL84-2C405-AC- Brand
- Ford
- Also Replaces
AL84-2C219-AC,28.5261-7605.3,AM6Z-2C219-A,AM6Z-2C219-B- Also searched as
AL842C405ACMO- Also Known As
- Anti-Lock Brake Module, ABS Control Module, EBCM
Condition & Testing
- Condition
- Used
Specifications
- Material
- Plastic
- Color
- Black
- Placement
- Front
- Left
- Lower
- What's Included
- Pigtail
- Dimensions
- 6.0" H × 10.0" L × 10.0" W · 32.0 oz
Compliance
- Country of Origin
- Mexico





