






2008-2010 Ford Explorer Sport Trac Transfer Case Cont Mod TCCM 8L2A-7H473-BB OEM
8L2A-7H473-BB
VIN programming required after install
This module needs VIN programming after install. A dealer or locksmith with the right scan tool can do it. Not sure your installer can program? Message us first — we'll help you confirm.
Tested functional. Cleaned. Will require programming to your VIN.
This OEM transfer case control module fits the 2008–2010 Ford Explorer Sport Trac and carries part number 8L2A-7H473-BB. It reads the 4WD selector and drives the encoder motor to complete four-wheel-drive shifts — failures on this platform commonly appear as a 4WD service message, flashing mode lights, or an incomplete shift. Tested functional and cleaned; programming to your VIN is required.
From the shop
This module takes the command from your 4WD selector and sends it to the transfer-case encoder motor, then checks the motor's position sensor to make sure the shift actually happened. If the dash is throwing a 4WD service message, the mode lights won't settle down, or the transfer case hangs up partway through a shift, this is the part that usually gets the blame. Tested functional. Cleaned. Mounts front. Part number: 8L2A-7H473-BB. Fits 2008–2010 Ford Explorer Sport Trac. This unit requires programming to your vehicle after installation. Ships Mon–Fri before 3pm EST. — Hubes
— Hubes
Vehicle fitment
Fits 2008–2010 Ford Explorer Sport Trac. Replaces OEM # 8L2A-7H473-BB.
| Years | Makes | Models |
|---|---|---|
| 2008–2010 | Ford | Explorer Sport Trac |
Is this your problem?
A quick diagnostic from the shop — see the symptoms before you buy, so you order the right part once.
Read the full transcript
Specifications
Part Identification
- OEM Part Number
8L2A-7H473-BB- Brand
- Ford
- Also searched as
8L247H473BB- Also Known As
- Transfer Case Control Module, Transfer Case Module, 4WD Control Module, 4x4 Module
Condition & Testing
- Condition
- Used
Specifications
- Material
- Plastic
- Placement
- Front
- What's Included
- Connectors
- Dimensions
- 6.0" H × 10.0" L × 8.0" W · 20.8 oz





