









2002-2005 BMW 745i 745Li ABS Brake Pump DSC Module 34516761783 OEM
34516761783
VIN programming required after install
This module needs VIN programming after install. A dealer or locksmith with the right scan tool can do it. Not sure your installer can program? Message us first — we'll help you confirm.
Tested and functional. Connector pins intact. Cleaned exterior.
Programming required — this module must be programmed to the vehicle before use. This is the OEM ABS Brake Pump DSC Module — part number 34516761783 — fitting 2002–2005 BMW 745i and 745Li. Tested and functional with intact connector pins and a cleaned exterior, this front-mounted unit requires vehicle-specific programming before installation.
From the shop
When the anti-lock function drops out on these, the pedal still stops the car, but you lose the wheel-by-wheel control that keeps a wheel from locking up — usually with the ABS lamp lit the whole time. Fits 2002–2005 BMW 745i and 745Li. Part number: 34516761783. Mounts front. Tested and functional. Connector pins intact. Cleaned exterior. This unit requires programming to your vehicle after installation. Worth checking your old unit's tag against the number above before ordering, since these are specific to the chassis. Ships same day Mon–Fri before 3pm EST. — Hubes
— Hubes
Vehicle fitment
Fits 2002–2005 BMW 745i; 2002–2005 BMW 745Li. Replaces OEM # 34516761783.
| Years | Makes | Models |
|---|---|---|
| 2002–2005 | BMW | 745i |
| 2002–2005 | BMW | 745Li |
Please note: E65/E66 7-Series DSC hydraulic unit, pre-facelift 745i/745Li (Hollander-verified 2002-2004; 2005 is the final 745i model year). The facelift 2006-2008 750i/750Li pools separately in Hollander with a different ID (34516771231-family) — rebuilder-reported only for this PN; match the part number on your unit. NOTE: the DSC PRECHARGE COMPRESSOR (e.g. 6781487) and the Dynamic Drive pumps (6758704/6781499) are different parts from this ABS pump. Coding to the vehicle required.
Is this your problem?
A quick diagnostic from the shop — see the symptoms before you buy, so you order the right part once.
Read the full transcript
Specifications
Part Identification
- OEM Part Number
34516761783- Brand
- BMW
- Also Known As
- Anti-Lock Brake Module, ABS Pump, ABS Control Module, EBCM, HCU, Hydraulic Control Unit, ABS Hydraulic Unit
Condition & Testing
- Condition
- Used
Specifications
- Material
- Aluminum, Plastic
- Connector Type
- Large heavy-duty rectangular Lever-Lock Slide-Lock plastic
- Terminal Type
- Pin
- Terminal Count
- 42
- Placement
- Front
- What's Included
- Pigtail
- Dimensions
- 8.0" H × 10.0" L × 10.0" W · 128.0 oz
Compliance
- Country of Origin
- Germany





